Results of Titanium Coagulant Aplication for Water Treatment

The technology for treating water to make it safe for drinking consists of using various methods to rid the water of its contaminants and to disinfect it. The initial phase of water treatment is to add reagents (coagulants) to remove suspended solids, microorganisms, and other contaminants. When coagulants are added to the water, they form flocflocs which agglomerate various contaminants that then settle down. The contaminants are removed with the sludge resulting from this process. The effectiveness of the coagulants is determined by the speed of the formation and sedimentation of the floc, and the degree to which the suspended solids are removed.

Technology of Industrial Effluents Purification

Anthropogenic stress caused by industrial manufacturing expansion is growing increasingly as well as a volume of non-treated industrial effluents. Therefore there is the task of current importance to design and develop new more effective and economical methods of wastewater purification as well as new reagents for this. Unique features of the titanium coagulant offer solution for such problem. It is possible to reduce expenses for wastewater by low cost titanium coagulant synthesis from semi-products of metal titanium or titanium dioxide industry and some other metallurgical industry byproducts.

Industrial Effluents Suspended Substances Removal

The results of tests where titanium coagulant (TC) was applied as artificial clarifying (precipitating) agent in comparison with more traditional alum.

New Generation Titanium Compounds Containing Coagulants Application for Industrial Wastewater Purification

Comparative study of efficiency of titanium compounds containing coagulant was curried out in comparison with traditional coagulants such as polyacrylamide (PAA) and ferric chloride (FеСl₃).

Feedwater for Power Generation Plants Treatment

Reliable and stabile power generation plant functioning in many respects depends on feeding water quality that is a result of dissolved salts and organic substances removal. The presence of organic matter is particularly undesirable because of its redistribution between phases (steam and small quantities of residual water) during a steam generation.

Titanium Coagulant Application for Swimming Pool Water Treatment

Health research of the titanium coagulant usage for swimming pools had been passed. The experiments were on using the titanium coagulant in contemporary purifying technologies and chemical treatment of water in swimming pools.

The Titanium Coagulant and Hydrogen Ion Exponent (pH) of Treated Water

In most cases if titanium coagulant employed under the same conditions no additives required. Due to flexible method of titanium coagulant synthesis it could be produced with special acidic formula that ideally fit to any treated water.